F2 Series Fire Rated Electric Strike

This unique, versatile, "all-in-one", fire rated electric strike combines strength, (1500 lbs holding force) convenience, (everything you need is in the box) and in an attractive, sleek easy to install design.

What makes this strike unique is the "Saw-tooth Adjustment Locator" design that allows the installer to move the deadbolt keeper, or plug and deadlatch ramp vertically to align with a wide variety of mortise locks with offset latches. There's no need to order special faceplates, you can adjust the strike to work with any mortise lock. Everything you need is in the box, including a faceplate for centreline latch entry.

We make installation easy. Our unique shim design adjusts vertically on the keeper to align with any latch location to give you up to 1/8" horizontal adjustment. We also include a trim plate for messy frame cuts, a hands-free adhesive template and all the drivers you need to install the strike.

Our unique plug-in latch monitor switch option can be added in the field if you decide monitoring is required after installation. Don't buy another strike...

DOOR FRAME TYPE

DOOR LOCK TYPE
Aluminum Hollow
Metal
Wood
Cylindrical Mortise Mortise Exit Device
Aluminum Frame Section Steel Frame Section Wood Frame Section Cylindrical Door Lock Mortise Door Lock

Mortise Exit Device

 

Applications:

Fire Rated Airport Arena Facilties factory inside door office corridor library Retail healthclub

• Commercial Centers
• Industrial Buildings
• Educational Facilities
• Retail Outlets
• Health Care Facilities
• Office Complexes

Easysecurityfire labeled5 year

STANDARD FEATURES

  • "Saw-tooth Adjustment Locator" design that allows the installer to move the deadbolt keeper, or plug and deadlatch ramp vertically to align with a wide variety of mortise locks with offset latches. There's no need to order special faceplates, you can adjust the strike to work with virtualy any mortise lock type.
F2_SawtoothLocator
  • Heavy-duty stainless steel construction with 32D finish (Brushed stainless steel)
  • Up to 1500lbs (680kg) holding force
  • Fits frame cutout for HES 1006 (1003)
  • Accommodates ¾" latch projection
  • Centerline faceplate included for centerline latch entry
  • Horizontal adjustability up to 1/8" (3mm) for misaligned frames
  • Vertical Adjustability for precise deadbolt and latchbolt alignment
  • Adjustable deadbolt keeper and deadlatch ramp
  • Accommodates up to 1" deadbolt (Night-latch function only, bolt will not release)
  • Field selectable voltage input - Accommodates 12 or 24VDC and 12 to 24VAC
  • Anti-tamper security screws
  • All installation drivers included
  • Low current draw (0.19 Amps @24VDC)
  • "Cool Keeper" Solenoid located in house prevents keeper from heating up
  • Plug-in wire connector
  • Trim plate included
  • Adhesive paper template included
  • Non-handed
  • Fail-locked (fail secure) mode standard
  • Optional Latch Monitor kit

Note: Fail-unlocked (fail-safe) strikes are not permitted on fire labeled doors.

WARRANTY
5 Year Limited Warranty

Model Mode Voltage Duty Sound Amps* Ohms†
F2164 Fail Locked 12 VDC Continuous
Silent .375 37
F2164 Fail Locked 24 VDC Continuous Silent .190 148
F2164 Fail Locked 12-24 VAC Intermittent
Buzz
.280 - .565 37

Intermittent Duty = Energized less than 1 min. with Duty Ratio 1:5
Continuous Duty = Energized 1 min. or more
* Ratings are based on maximum current draw at +10°C and include initial power-up current draw.
† Nominal resistance at +25°C ± 7% tolerance

The fail secure locking mechanism shall only be installed where allowed by the local authority having jurisdiction and shall not impair the operation of the panic hardware or intended operation of the emergency exit.

Certification

Intertek
Security UL

UL 1034 Burglary Resistant Listed

UL 10C (3 Hour) Fire Rated

Model

Description

Finish

F2LM Latch Monitor Kit (Plug-in)* -

*The Latch Monitor Module has a SPDT switch. This module can be mounted anywhere in the strike cavity to correspond to Latch position.
Note: F2LM is rated at 2 Amps @ 24VDC

Model

Description

Dimensions

Mode Voltage

Finish

F2164
Security ULIntertek
Fire Rated Electric Strike for Offset or Centerline Latch entry
ANSI 1-1/4"W x 4-7/8"L
Fail locked, Fire Labeled Field selectable  12 or 24VDC and 12 to 24VAC 32D

Finish 32D - Brushed Stainless Steel